Comtest-networks CPE-42 ADSL POTS Splitter Bedienungsanleitung PDF herunterladen

This guide provides the basic information required to install the ISDN Splitter in a customer premises.

Installation

The CPE-42 can be installed on any flat surface in a dry location inside the customer premises. The orientation

of the CPE-42 is not important but it should be positioned to provide easy access to the RJ-45 connectors.

The installation of the splitter requires 2, #8 – 2.54 cm wood screws. The screws should be inserted into the

tabs located at the top and bottom of the splitter and tightened until there is no noticeable movement when a

light force is applied to the splitter.

It is important to note that the CPE-42 should NOT be installed in locations where it might be exposed to

excessive moisture or extreme temperatures. The splitter should not be mounted behind doors or in areas of

high traffic where it may be impacted.

Grounding

This CPE-42 does not require an earth ground.

Connectors

The CPE-42 is equipped with three RJ-45 jacks to enable quick connection to

PHONE, LINE, and ADSL modem. Insert mating plugs from the phone, line, and

ADSL modem into the appropriate jacks.

Testing the CPE-42

To test the CPE-42 for correct operation simply lift the handset of the phone connected to the PHONE port on

the splitter. You should hear dial tone. If the ADSL modem is correctly connected to the ADSL Port on the CPE-

42 the ADSL Status light on your modem should be illuminated indicating ADSL service.

If the unit does not appear to function correctly contact the technical support number below.

Warranty

The CPE-42 is covered by a 3 year warranty under normal operating conditions. Defective units should be

returned to Comtest Advanced Networks where they will be replaced or repaired and returned to the user. The

CPE-42 contains no user serviceable parts. Opening the plastic housing voids the warranty and may expose

the user to hazardous voltages.

Residential ADSL POTS Splitter

Installation Guide

Canada Help

One Raymond Street [email protected]

Ottawa, Ontario 1-800-668-2668 (Canada)

K1R 1A2, Canada

Tel: 1-613-226-2301

Fax: 1-613-226-2371

Comtest Advanced Networks

- ADSL

- LINE

- PHONE

Installation Guide 1

Inhaltsverzeichnis

Seite 1 - Installation Guide

This guide provides the basic information required to install the ISDN Splitter in a customer premises. Installation The CPE-42 can be install

Kommentare zu diesen Handbüchern

Keine Kommentare

Comtest-networks CPE-42 ADSL POTS Splitter Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikation Comtest-networks CPE-42 ADSL POTS Splitter herunter. Comtest Networks CPE-42 ADSL POTS Splitter User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikation Comtest-networks CPE-42 ADSL POTS Splitter